Xhorse VVDI Key Tool Plus Adds 2020 Toyota Camry Smart Key

Xhorse VVDI Key Tool Plus can successfully add the 2020 Toyota Camry smart key by OBD. Here I have the original key, let me show the procedure.


Key programming >> ASIA >> Toyota >> Selected from model >> Camry >> Keyless Go >> 2019- >> Type 1(8A -Page P4 A8/A9/AA) >> Start programming >> Add smart keys

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-1

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-2

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-3

If it is the EEPROM data backed up by OBD, please ignore this prompt.

If the EEPROM data backed up by the adapter was just used, please restore the vehicle before performing this function.

Press Yes.


Please ensure the device is connected to the Internet before executing this function. This function can use a registered original car key or emergency start key to add a new key.

Press OK.


Please turn the ignition to the ON position(the instrument panel is on).

Key Tool Plus will show the software no.

Press OK.


Number of registered keys: 2

Number of keys remaining to be registered: 5

Note:

The maximum number of keys for a few car models may not be correct.

Press OK.

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-4

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-5

Keep touching the ignition switch with the sign surface of a registered key.

Complete the operation within 30s after clicking OK.


Click OK and keep touching the ignition switch with the sign surface of the key to be registered within 30s.

Note: If the key sounds once, take the key farther away. If the key sounds twice, it is programmed successfully.

Press OK.


Please keep the key touching the ignition switch.

Make sure all steps are completed. Wait for registration to complete.

Key registration succeeded!


Number of registered keys: 3

Number of keys remaining to be registered: 4


The matching is completed. If the key remote does not work, please use the [Synchronize ECU and ID] function (multiple synchronizations may be required) to synchronize the remote code.

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-6

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-7

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-8

xhorse-vvdi-key-tool-plus-adds-2020-toyota-camry-smart-key-9

www.xhorse.co.uk

Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI2/ Key Tool Plus VAG MQB NEC35xx Support List

Image
Since Xhorse opened VAG MQB License for NEC35xx reading, many users are frequently asking if their model supports it. Here we've collected the currently supported list as below. Users should read out the VAG number via VVDI2 / VVDI Key Tool Plus first, then check the model in the following list. *If it's not on the list, the model is not supported for the time being. Xhorse VAG MQB NEC35xx Support List Audi Q3 81A920940A VDO+MQB Audi A3/S3/Q2 8V0920860E VDO+MQB 8V0920860G VDO+MQB 8V0920860N/P VDO+MQB 8V0920861/A/H/N VDO+MQB 8V0920870H VDO+MQB 8V0920872B VDO+MQB 8V0920960A VDO+MQB 8V0920960B VDO+MQB 8V0920960H VDO+MQB 8V0920960M VDO+MQB 8V0920961C VDO+MQB Audi Q2L 8V0920740B RH850(Not supported) VW Golf 7 5G0920640A JCI+MQB 5G0920860/A VDO+MQB 5G0920861/A VDO+MQB 5G0920871A VDO+MQB 5G0920950 VDO+MQB 5G0920960A VDO+MQB 5G1920640A JCI+MQB 5G1920640C JCI+MQB 5G1920641A JCI+MQB 5G1920656B VDO+MQB 5G1920730B JCI+MQB 5G1920731A JCI+MQB 5G1920740 VDO+MQB 5G1920740A VDO/JCI+MQB 5G1920...
Read more

Xhorse Condor XC-MINI Plus II Modify HON66 to VA2T Key Blank

Image
Modify key feature has been updated on Xhorse Condor XC-MINI Plus II & Dolphin II Key Cutting Machine recently. Following we're gonna show how to modify a HON66 to VA2T key blank via this function. Check full operation: Modify HON66 to VA2T As we can see, the HON66 is wider than VA2T key blank. So we should modify and remove the excess part of the HON66 key blank. Modify key >> VA2T Follow the on-screen instruction to install HON66. Start cutting >> OK with default setting XC MINI PLUS 2 will start cutting automatically... Just wait until finished. Now we can see the edge of HON66 has been partly removed. Install the key blank reversely to cut the rest part. Now you got yourself a VA2T key blank. Copy VA2T Key And we can use this new key blank to copy a VA2T key. Automotive >> Key blank >> VA2T Rotate M5 clamp to B side, insert the key. Press "Decode key" to start learning... Key learning success. Remove VA2T, insert a new key for preparatio...
Read more

Xhorse VVDI Key Tool Plus Program VW Arteon MQB48 AKL

Image
This is a tutorial on how to program Volkswagen Arteon MQB48 all keys lost with Xhorse VVDI Key Tool Plus step by step. Total 3 steps: we'll need to acquire the vehicle data first, then send it to the third-party for online calculation. Finally, we can use the calculated files for key programming. Step1. Read Immo Data 1) Switch ignition on. 2) This car has the kessy control. Remove the connector from the kessy control and connect connect jumper cable to PIN27, PIN30 & PIN35. 3) Connect Key Tool Plus to car OBD to collect data. Immo programming >> Europe >> VW >> Select by type >> MQB instrument immo system >> Instrument - NEC35xx(Continental/VDO) >> Start programming >> Calculate online >> Get vehicle data >> Instrument - MQB48 immo system This function will read vehicle information data and save it locally, user can use this file to send it to other people who can do online to get immo data. Press OK. Note: Please turn o...
Read more