Xhorse VVDI Key Tool Plus Adjust BMW CAS3+ E92 Mileage

Xhorse VVDI Key Tool Plus Pad is able to do BMW CAS3+ E92 mileage correction via EEPROM dump successfully. This is provided by Xhorse fan, please noted do not adjust mileage for illegal purpose.

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-1

Check full video:



Operation Procedure:

1. Backup Key Info

Immo programming >> BMW >> Select from system >> CAS3/CAS3+ immo system >> Key function >> Start programming >> Generate key via OBD >> Read key information


Add keys: please inset the ignition key into ignition switch and connect the vehicle and device well.

All keys lost: please insert a blank key into ignition switch and connect the vehicle and device.

Click "YES" to add key.

Cllick "NO" to all key lost.

Press "No".

Confirm key info, press "Yes".


The dealer key should be taken away from ignition switch.

If key is keyless, please move it out of car.

If there's no key ignition, continue anyway.

Press "OK".

Reading key success.

Save key file.

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-2


xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-3


2. Read & Save EEPROM

Go back to

EEPRM function >> Start programming >> Read EEPROM


The dealer key should be taken away from ignition switch.

If key is keyless, please move it out of car.

If there's no key in ignition, continue anyway.

Press "OK".


Current EEPROM is not the whole EERPOM.

Please read and save it then continue.

Reading data success.

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-4


xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-5

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-6


3. Mileage Adjustment via Dump

KM repair >> Start programming >> Repair mileage via EEPROM >> CAS3+(0L15Y, 0M23S) >> Load EEPROM dump file


Warning: KM re-calibration only use for repair car KM after exchange new dashboard!

Press "Yes" to continue.

Old KM: 193236

Input new KM: 123450

OK >> OK

Save new KM file.

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-7


xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-8

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-9

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-10


Change KM in immobilizer success, flash the new file into IMMO ECU.

You must change KM in instrument dashboard manually before connect IMMO ECU to car.


Repeat operations to check new mileage.

It has became to 123450km.

Done.

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-11


xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-12

xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage-success-13


This is using VVDI Key Tool Plus to perform BMW CAS3+ E92 odometer correction OK.

http://blog.xhorse.co.uk/xhorse-vvdi-key-tool-plus-adjust-bmw-cas3-e92-mileage/


Comments

Post a Comment

Popular posts from this blog

Xhorse VVDI2/ Key Tool Plus VAG MQB NEC35xx Support List

Image
Since Xhorse opened VAG MQB License for NEC35xx reading, many users are frequently asking if their model supports it. Here we've collected the currently supported list as below. Users should read out the VAG number via VVDI2 / VVDI Key Tool Plus first, then check the model in the following list. *If it's not on the list, the model is not supported for the time being. Xhorse VAG MQB NEC35xx Support List Audi Q3 81A920940A VDO+MQB Audi A3/S3/Q2 8V0920860E VDO+MQB 8V0920860G VDO+MQB 8V0920860N/P VDO+MQB 8V0920861/A/H/N VDO+MQB 8V0920870H VDO+MQB 8V0920872B VDO+MQB 8V0920960A VDO+MQB 8V0920960B VDO+MQB 8V0920960H VDO+MQB 8V0920960M VDO+MQB 8V0920961C VDO+MQB Audi Q2L 8V0920740B RH850(Not supported) VW Golf 7 5G0920640A JCI+MQB 5G0920860/A VDO+MQB 5G0920861/A VDO+MQB 5G0920871A VDO+MQB 5G0920950 VDO+MQB 5G0920960A VDO+MQB 5G1920640A JCI+MQB 5G1920640C JCI+MQB 5G1920641A JCI+MQB 5G1920656B VDO+MQB 5G1920730B JCI+MQB 5G1920731A JCI+MQB 5G1920740 VDO+MQB 5G1920740A VDO/JCI+MQB 5G1920...
Read more

Xhorse Condor XC-MINI Plus II Modify HON66 to VA2T Key Blank

Image
Modify key feature has been updated on Xhorse Condor XC-MINI Plus II & Dolphin II Key Cutting Machine recently. Following we're gonna show how to modify a HON66 to VA2T key blank via this function. Check full operation: Modify HON66 to VA2T As we can see, the HON66 is wider than VA2T key blank. So we should modify and remove the excess part of the HON66 key blank. Modify key >> VA2T Follow the on-screen instruction to install HON66. Start cutting >> OK with default setting XC MINI PLUS 2 will start cutting automatically... Just wait until finished. Now we can see the edge of HON66 has been partly removed. Install the key blank reversely to cut the rest part. Now you got yourself a VA2T key blank. Copy VA2T Key And we can use this new key blank to copy a VA2T key. Automotive >> Key blank >> VA2T Rotate M5 clamp to B side, insert the key. Press "Decode key" to start learning... Key learning success. Remove VA2T, insert a new key for preparatio...
Read more

Xhorse VVDI Key Tool Plus Program VW Arteon MQB48 AKL

Image
This is a tutorial on how to program Volkswagen Arteon MQB48 all keys lost with Xhorse VVDI Key Tool Plus step by step. Total 3 steps: we'll need to acquire the vehicle data first, then send it to the third-party for online calculation. Finally, we can use the calculated files for key programming. Step1. Read Immo Data 1) Switch ignition on. 2) This car has the kessy control. Remove the connector from the kessy control and connect connect jumper cable to PIN27, PIN30 & PIN35. 3) Connect Key Tool Plus to car OBD to collect data. Immo programming >> Europe >> VW >> Select by type >> MQB instrument immo system >> Instrument - NEC35xx(Continental/VDO) >> Start programming >> Calculate online >> Get vehicle data >> Instrument - MQB48 immo system This function will read vehicle information data and save it locally, user can use this file to send it to other people who can do online to get immo data. Press OK. Note: Please turn o...
Read more